SUP'AIR manufactures its products in Europe. Most of the components used are
Made in Europe
.
S
UP’AIR
_
A
CRO
3
Page 22
User’s manual ACRO 3
Maintenance
Washing and harness maintenance.
It is a good idea to wash your harness from time to time. We recommend using a soft solvent (such as soap), use a brush and rinse
thoroughly.
DO NOT use chemicals such as aggressive detergents or strong solvents as they may deteriorate the webbing, stitching and harness
fabrics.
The zip fasteners should be lubricated from time to time, using a silicon spray only.
Storage and transport.
When not using your harness, store it inside your paragliding rucksack, in a dry, cool and clean place, protected from UV exposure. If
your harness is wet, please dry it thoroughly before storing.
During transport, protect the harness from any mechanical or UV deterioration (use a bag). Please avoid long transports in wet or
humid conditions.
Product longevity.
Independently from the pre-flight checks, you must open and unfold your rescue parachute once every 6 months.
Once every 2 years, you need to perform a complete harness check :
• webbings (no wear, tear or material unraveling, no unwanted folds)
• The threads making the webbing and fabrics used in the ACRO3 have been selected to offer the best possible light weight to lon-
gevity ratio. Nonetheless, in some conditions, after long term exposure to UV and/or significant abrasion or exposure to chemicals,
it is compulsory to have your harness's integrity checked at a certified repair centre. Your safety depends on it.
• These carabiners must never be used for anything else than paragliding (not for climbing, no towing, etc.).
• Carabiners must be replaced by new ones every five ( 5 ) years by identical models or models recommended by the manufac-
turer ( SUPAIR ).