Sunways PT 30k, User Manual, Page: 79 / 88

Operation
PT 30k to PT 33k 77
NOTE
Please note!!! With time-based tariffs (e.g. modem connection with GSM or
analog), this function can result in very high phone charges!
Function buttons Use the "Send" option to save the settings in the Solar Inverter.
Use "Read" to display the settings currently stored in the Solar Inverter.
With "Modem Test", you can test the modem connection to the set Internet
provider. You will receive feedback as to whether dialling in was successful.
Click "About" to obtain additional information about the modem.
Click "Initialise" to re-initialise the modem.
NOTE

Before conducting the modem test, the settings must be stored in the Solar
Inverter with "Send".

For example, you can select inexpensive dial-in numbers for Internet provi-
ders at www.teltarif.de/internet or www.billiger-surfen.de. Here you will
find not only tariff information, but also the access data (phone number,
user name, password).
E-mail settings In order for the Solar Inverter to be able to send e-mails, the e-mail settings
must be stored via the Sunways browser. The settings can be accessed via "Set-
tings – Network" in the section "E-mail settings".
NOTE
Requirements:

When dialling in via modem, the correct dial-up settings must be stored (see
Internet dial-up via modem).
Standard SMTP If the standard SMTP server is activated, the e-mails are sent via a preconfigured
mail server.
SMTP provider SMTP server for sending e-mails, e.g. mail.gmx.net (max. 30 characters). Alter-
natively an IP address can be entered.
p
h
o
t
o
v
o
l
t
a
i
k
f
o
r
u
m
.
c
o
m