Installation
24
PT 30k to PT 33k
DANGER
Use a tool (e.g. pliers) to bend the punch-outs in order to avoid injury.
NOTE
The individual ribs of the rodent protection should be bent along the length of
the cable and should
not be broken!
4. Configuration of the rodent protection:
1 Punch-outs for AC cables
2 Punch-outs for interface cables
3 Punch-outs for DC cables
5. Guide the cable on the Solar Inverter back over the cable brackets through
the opening of the unit in front of the rear foam strip.
6. Open the strain relief device and guide the cables through it.
7. Install the cables (see Solar generator connection and Grid connection).
8. Pull the cables back slightly and re-attach them with the strain relief device.
3
2
1
p
h
o
t
o
v
o
l
t
a
i
k
f
o
r
u
m
.
c
o
m
Summary of Contents for PT 30k
