Sunways PT 30k, User Manual, Page: 69 / 88

Operation
PT 30k to PT 33k 67
After the connection is established, you can start the Sunways browser by ente-
ring the IP address of the PT series in the address line of your web browser.
For more complex network configurations, please contact your network admi-
nistrator.
Connection via an existing
Ethernet network You can integrate the PT series Solar Inverter directly in an existing home or
company network as a network device.
Connect your PC and the Solar Inverter with a CAT 5 Ethernet patch cable.
The master is connected to the network as standard.
With DHCP If a DHCP server is present in your network, you can activate DHCP on the Solar
Inverter. In this case, the Solar Inverter obtains the network settings automati-
cally. You can display the assigned IP address via the LCD display (menu Settings
– Network – Ethernet).
Without DHCP If there is no DHCP server in your network, you must set an unused IP address
on the Solar Inverter (see section Solar Inverter network settings).
Ask your network administrator for the necessary settings for IP address, net
mask and gateway.
After the connection is established, you can start the Sunways browser by ente-
ring the IP address of the Solar Inverter in the address line of your web browser.
Remote access via a DSL router If a DSL connection or a network with Internet access is available, you can make
the Solar Inverter accessible via the Internet.
Requirements:

Your DSL router supports static IP address services such as www.dyndns.org.

Your router supports port forwarding.
PC PC
Hub
Switch
Router
INVER
TER
INVER
TER
Master
Slave
Max. total CAN bus length:
500 m
Max. Ethernet connection:
100 m
p
h
o
t
o
v
o
l
t
a
i
k
f
o
r
u
m
.
c
o
m