30
Problem Solution
IR LEARNING is
not successful
1. Replace the batteries in
both the unit and the
target device’s remote.
2. Keep the target
device’s remote control
and the unit’s learning
eye about 2-4 inches
apart.
3. Do not use the learn
function near an
incandescent lamp.
4. The learning process has
no errors, but you still
can’t control your AV
devices: Repeat the
learning procedure
again
Macro does
not work
1.
Target device’s remote
might not be
compatible with
learning procedure.
2.
Be sure to aim the unit
at the devices while
the macro commands
are being sent.
3.
Macro was not
properly set up.
Repeat macro set-up
procedure.
The LCD screen
turns off
The unit is preset to
automatically switch the
LCD off after 90 seconds.
Just tap the screen to turn
the unit back on again
