24
Transferring Information from Unit to
Unit
1. Connect the two units
with a transmit wire (not
included).
2. Press and hold
for
four seconds.
3. Press each number button (2, 4, 6, 8) in any
order until they disappear.
begins
flashing and
appear on the
screen.
4. Press
or
until you reach
.
5. Press
. During
transmission, the screen
displays blank keys.
When transmission is
complete,
is
displayed on the
screen.
Note:
• If there is an error in transmission,
appears on the display.
• Press
to exit without transferring data.
25
Setting the Backlight
The backlight function is always powered on,
but can be set to remain on for shorter or
longer periods of time.
1. Press and hold
for
four seconds.
2. Press each number button (2, 4, 6, 8) in any
order until they disappear.
begins
flashing and
appear on the
screen.
3. Press
. A number pad 1-6 appears on
the screen.
4. Press a number to select the amount of
seconds the backlight stays on after
pressing a key.
Note:
The backlight can be set from 10-60 seconds.
Therefore, the number pad is set in 10-second
increments. 1 is for 10, 2 is for 20 seconds, and
so on.
5. Press
to confirm setting.
6. Press
to exit this mode.
Note:
Press
at any time while setting the
backlight to exit backlight mode.
