background image

Preface 

About this manual 

This manual is designed to make the 

use of the SRC-3060 smart remote 

control as easy as possible. Information 
in this document has been carefully 

reviewed for accuracy and is subject to 

change without notice.                                               

 

Copyright 

© Copyright 2006   

This document is protected by the 

international copyright law. No part of 

this publication may be reproduced by 
any means without the permission of 
SUNWAVE Technology Corporation in 
Taiwan. 

The information provided from 

SUNWAVE Technology Corporation is 
believed to be accurate. Any change and 

enhancement to the product and to the 

information thereof will be documented 
and issued as a new release to this 

manual. 

 

Trademarks 

Other product names mentioned in 

this manual are used for identification 

purposes only. All trademarks and 
registered trademarks are the property 

of their respective owners. 

 

1

Table of Contents 

 

ABOUT SRC-3060 ................................... 2 

BATTERY PRECAUTIONS.......................... 2 

TOUCHSCREEN PRECAUTIONS ................. 3 

REMOTE CONTROL FEATURES .................. 3 

IDENTIFYING COMPONENTS .................... 4 

REMOTE CONTROL OPERATION ................ 5 

Inserting the Batteries .......................... 5 

Customizing the Remote Layout ............. 6 

Manually Setup by Pre-code .................. 7 

Automatically Setup by Pre-code .......... 10 

Using Learning Mode to Setup.............. 13 

Using Delete Mode to Setup................. 16 

1. Deleting preset code for a key ..... 16 
2. Deleting preset codes for an entire 

devices ..................................... 17 

3. Deleting preset codes for all devices 

at once ..................................... 18 

Macro Function .................................. 20 

1. Creating a Macro ........................ 20 
2. Running a Macro ........................ 23 
3. Viewing assigned Macro keys ....... 23 

Transferring Information from Unit to Unit24 

Setting the Backlight .......................... 25 

Setting Backlight Sensitivity ................ 26 

Turning off the Beep Signal.................. 27 

Alternating between Screens ............... 27 

TROUBLESHOOTING GUIDE ................... 28

 

Summary of Contents for SRC-3060

















Reviews: