Troubleshooting Tables
45
Problem
Solution
An “
ERROR
”
message is
displayed while
operating
1. There is no code in the key or button.
“
REC
” key can not
be used
1. For safety issue, the SRC-3820 requests
users to tap “
REC
” key over 2 seconds
at least.
The code can not
be learned
successfully
1. Make sure the SRC-3820 and original
remote renew batteries.
2. Make sure you press each hard
button of original remote at least over
2 seconds.
3. Make sure the original remote would
aim at learning eye of SRC-3820
straightly.
4. Keep 2~4 inches (5~10 cm) apart
between SRC-3820 and the original
remote.
5. Do not learn near an incandescent
lamp.
6. Memory capacity is full.
7. Make sure the original device is using
IR system.
A button stores
two or more
codes
1. In SRC-3820, you should store each
code to individual key by learning.
When you enter
a code number
but coming out
an “
ERROR
”
message
1. The code number doesn’t exist in the
code list.
2. The code number doesn’t belong
to the attribution same with your
target device.
