SRC-3820 User’s Manual
36
Using the Transmission Feature
The SRC-3820 can transmit inner data to another SRC-
3820 by the optional UART cable.
1.
Take a UART cable and connect
the source SRC-3820 to another
target one.
2.
On the source SRC-3820, enter the
setup mode and select TRANS
option and tap
to confirm.
3.
A confirmation screen will pop up.
You are prompted to reconfirm the
action. Let 4 numbers disappear by
finger tapping.
4.
During transmitting, the LCD will
show processing message as
.
5.
When the transmission is successful,
it will show “
OK
” message. In case
the transmission is failed, it will show
“
ERROR
” message.
6.
Whatever it is successful or not, the
screen will back to the setup mode
when completion.
