ST3500 User Manual
7
If 0, report in driving will be sent only one time when
vehicle starts driving.
T3
String
Sec
Interval for sending status report in emergency mode
Range : 0 ~ 9999
If 0, emergency report will be sent only one time when
emergency state occurs.
A1
String
Number of attempts for emergency report until the device
gets acknowledge from server
If 0, no emergency report will be sent.
SND_DIST
String
Meter
Distance interval for sending status report.
Range : 0 ~ 60000 (60km)
If 0, status report related on moving distance is disabled.
If not 0, stats report is send when traveled distance
reaches predefined SND_DIST.
T4
String
Sec
Interval for sending keep alive string
SMS_T1
String
Min
Interval for sending status report in parking mode
SMS_T2
String
Min
Interval for sending status report in driving mode
SMS_PACK_NO
String
Report No in one SMS message
ANGLE_RPT
String
Degree Report STT message if it’s greater than ANGLE_RPT.
0 : Disable
Range : 1 ~ 179
RPT_TYPE
String
Set the type of reporting.
0: FIFO : First in First Out.
1: LIFO : Last In First Out.
<example>
[command] ST3500RPT;850000;02;180;120;60;3;0;0;0;0;0;0;0
[response] ST3500RPT;Res;850000;010;180;120;60;3;0;0;0;0;0;0;0
<notes>
** If report interval is set big number, network may disconnect WCDMA connection because WCDMA
communication is not progressed for a long time. So, unit may not receive command by WCDMA. T4 is for
protecting against this disconnection by sending short data with short term.
** Alive report can be sent only when the device has no data to send during T4 interval.
4-3. Event Parameter Setting
