6
7. [TIMER]
Programmable time switch with start and residual time
Starting time: This function is used to switch on the TRANSFORM unit automatically when the time
entered has expired. Proceed as follows:
a) Press [TIMER] switch in Stand-by (TRANSFORM unit is connected but not in operation), to enter the
required number of hours after which the TRANSFORM unit is to start.
b) Select the required function (cooling, heating, dehumification) and set the required temperature.
c) When the set number of hours has expired, theTRANSFORM unit starts automatically.
If you press the [POWER] switch before the time has expired, the time programming is deleted, the
TRANSFORM unit switches on and can be operated in the required operating mode.
Residual time: This function is used to automatically deactivate the TRANSFORM unit when the time
entered has expired. Proceed as follows:
a) Press the [TIMER] switch during operation and enter the required number of hours after which the
TRANSFORM unit is to switch off.
b) After the flashing of the number of hours on the LED has stopped, you can select the required
function (cooling, heating, dehumification) and the required temperature.
c) When the set number of hours has expired, the TRANSFORM unit switches on automatically.
If you press the [POWER] switch before the time has expired, the Timer programming is deleted and
the TRANSFORM unit switches off.
8. [SLEEP]
Using this key you can set the sleep function of the TRANSFORM unit. The microprocessor integrated
in the TRANSFORM unit will raise the pre-set temperature by 2°C per hour up to a maximum of 4°C
after 2 hours and maintain this temperature until the set time has expired.
If you use the sleep function, first set the time switch to the set hours as described in the functions
Residual time or Starting time. Then press the [TIMER] switch until the required hours appear on the
display. After the hour display, the display switches automatically to the previous set temperature
display. To change the temperature, press the switch [TEMP+] or [TEMP-]. With each press on the
switch, the temperature increases or decreases by 1°C.
Summary of Contents for Klimatronic Transform 10500
Page 1: ...Instruction Manual ...
