10
CLEANING AND MAINTENANCE
PLEASE REMOVE THE POWER PLUG FROM THE SOCKET BEFORE CLEANING THE TRANSFORM
UNIT.
COARSE FILTER
The air filters on the side of the TRANSFORM units can be simply removed by pulling the frame sidewards.
When cleaning, use a vacuum cleaner with brush or wash the filters under running, warm water and dry
them with a soft cloth!
Please clean the coarse filters regularly when in use.
ACTIVATED CARBON FILTER
The activated carbon filter can not be washed. Please replace if required. We
refer to the part „Spare parts and Accessories“.
TROUBLE SHOOTING/ ERROR MESSAGES
The mobile air conditioner TRANSFORM is equipped with a 3-minute compressor-delay system
which means the compressor needs 3 minutes to start.
This affects the switching on of the TRANSFORM unit (POWER) as well as switching over from
one function to the next, e.g. dehumidify to cooling or heating.
ERROR/
PROBLEM
CAUSE
REMEDY
Can I switch the
TRANSFORM unit
on immediately
after unpacking
it?
No.
The TRANSFORM unit must be placed upright for at
least 24 hours after every transport. Otherwise the
compressor may be damaged and there is no capacity.
When switching
on the
TRANSFORM unit
I sense a smell.
What should I do?
Production-related
cause or incorrect
storage of unit at e.g.
dusty areas.
Odour development can arise on first use and after a
longer period of non-use by storing in unsuitable areas
(e.g. dusty areas).
Run the unit for ½ a day. The smell will disappear after a
while. In the case of intensive odour development, air the
room.
Can I operate the
TRANSFORM unit
WITHOUT the
extract air hose?
Yes, but only in dehumidification mode.
To achieve temperature adjustments, surplus heat or
coldness must be discharged.
At which intervals
should the
activated carbon
filter of the
TRANSFORM unit
be replaced?
To use the purpose of the filter fully, it should be
replaced every 6 months.
How can I
increase the
efficiency of the
TRANSFORM
unit?
External circumstances exist which may impact the
efficiency of the TRANSFORM unit. Room insulation,
use of wall/window adapter, ratio of window space (solar
radiation), operation of electrical units in the room (EDP),
presence of several persons in the room. You can
increase the efficiency of the TRANSFORM unit
accordingly by adjusting such circumstances.
Compressor does
not activate
Depending on ambient temperatures and TRANSFORM
unit type it may take approx. 10 minutes after starting the
compressor until the cooling/heating capacity is reached.
Summary of Contents for Klimatronic Transform 10500
Page 1: ...Instruction Manual ...