7
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
The feeder chute allows 360° rotation
for its best convenient positioning
when connecting the pellet auger to the
hopper.
The burner grate is a removable part,
which allows for comfortable cleaning
and maintenance of the burner.
Diagram 2. Pellet burner Pell Bio design
• Built-in controller.
The main control unit, located in the
burner, manages the entire heating
process. Controler functions:
Controler functions:
1) fully automated ignition and pellet
feed;
2) self-cleaning function (adjustable 1-6
times over 24 hours at equal intervals),
programmable start time;
3) controls the operation of the
circulation pump of the central
heating;
4) controls the operation of the pump of
the domestic hot water;
5) option for control by room thermostat;
6) timer;
2. PRODUCT DESCRIPTION
The BURNiT Pell BIO pellet burner for hot
water boilers is designed to burn only
and exclusively wood pellets and it is
intended to heat up heating boilers. The
built-in control unit, automatic cleaning
system and internal pellet auger ensure
the automated operation of the burner
and optimal burning of the fuel.
2.1. Design.
The burner is made of high-quality
stainless steel able to withstand
temperatures of up to 1150°С. The
burner must be installed on a heating
boiler.
The burner consists of two parts:
combustion
chamber
tube
and
external tube with sheet metal mantle.
Longitudinally, under the housing, there
are blow chamber, fuel ignition heater,
fan and power supply. On the upper part
of the burner there is a feeder chute
to which the pellet auger is attached.
The housing of the burner has been
designed to meet all regulatory safety
requirements (no sharp or protruding
elements) with operating temperature
not exceeding 50 °C.
The combustion chamber consists of two
tubes:
Ember resistant steel tube inside the
burner with holes for air intake along
its entire length, opening for the hot air
from the fuel ignition heater, opening for
photosensor.
Outer stainless steel tube. Between the
two tubes there is a gap which provides
for free circulation of the air necessary
both for cooling and oxygen supply into
the combustion chamber.
