11
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
5) Auger
6) Technical passport. Installation and
operation manual
7)
Service booklet and Warranty card
If any of the above items are missing,
contact your supplier.
6. STORAGE OF PELLET BURNER
Pellet burners shall be stored in dry and
well ventillated spaces, free from any
gases, liquids, acids and oil vapours that
may damage the burner. Storing burner
and auger in spaces with fertilizers,
chlorinated lime, acids, chemicals, ect.
is not allowed. Recommended storage
temperature shall be from +5°С tо
+40°С. Recommended relative humidity
-below 70%. When stored, the devices
shall not have direct contact with the
ground, placed on pallets, maximum
two tiers and in their original packaging.
The storage period is not more than 2
years from date of manufacture. It is
recommended that every burner is
tested before installation. Quality and
safety of the burner must be confirmed
by a test mentioned in the warranty
card.
7. MOUNTING OF THE BURNER
Mounting, installation and
setup of burner should be
carried out by authorized
technician.
Installer shall advise the user
of the installation minimum
clearances to combustible
materials and liquids.
5. DELIVERY OF THE PELLET BURNER
• Inspect the integrity of the packaging
upon delivery.
•
Check whether all components
have been delivered to you. Burner
consignment
package
includes
(diagram 3):
Diagram 3.
Pellet burner consignment elements
1) Pellet Burner Pell BIO with built-up
Control unit
2) Feeding chute
3) Fire irons
4) Burner grate
5
4
