Sunsystem BURNiT Pell BIO Series, Technical Passport, Installation And Operation Manual

Page: 10 / 36

10
INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL
4. TRANSPORTATION OF THE PELLET
When loading, transporting and
unloading of the device appropriate
safety equipment must be used in
accordance with Directive 2006/42/SE.
Product must be in original packaging
following the instructions on the label -
to be protected from adverse weather
conditions (snow, rain and dust) from
Table 2. European Certification of Wood Pellets for Heating Purposes
Parameters Units ENplus-A1 ENplus-A2 EN-B
Diameter mm
6 (± 1)
8 (± 1)
6 (± 1)
8 (± 1)
6 (± 1)
8 (± 1)
Lenght mm 15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
Bulk dentsity kg / m
2
≥ 600 ≥ 600 ≥ 600
Calorific/heating value MJ / kg ≥ 16,5-19 ≥ 16,3-19 ≥ 16,0-19
Humidity /moisture Ма .-% ≤ 10 ≤ 10 ≤ 10
Dust Ма .-% ≤ 1
3)
≤ 1
3)
≤ 1
3)
Mechanical durability Ма .-% ≥ 97,5
4)
≥ 97,5
4)
≥ 96,5
4)
Ash Ма .-%
2)
≤ 0,7 ≤ 1,5 ≤ 3,5
Melting point of ash °C ≥ 1200 ≥ 1100 -
Chlorine content Ма .-%
2)
≤ 0,02 ≤ 0,02 ≤ 0,03
Sulfur content Ма .-%
2)
≤ 0,03 ≤ 0,03 ≤ 0,04
Nitrogen content Ма .-%
2)
≤ 0,3 ≤ 0,3 ≤ 1,0
Copper content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Chromium content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Arsenic content mg / kg
2)
≤ 1,0 ≤ 1,0 ≤ 1,0
Cadmium content mg / kg
2)
≤ 0,5 ≤ 0,5 ≤ 0,5
Mercury content mg / kg
2)
≤ 0,1 ≤ 0,1 ≤ 0,1
Plumbum content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Nickel content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Zinc content mg / kg
2)
≤ 100 ≤ 100 ≤ 100
the shocks, and other activities likely to
cause damage. In case of malfunction of
the fan or the motor drive (noise, friction)
or failure of high-tech elements such as
broken LCD screen, contact your nearest
authorized service center for repairs and
maintenance.
- Dimensions of the packaging of the
burner: 450х350х750 mm
- Dimensions of the packaging of the
auger: 260х120х1700 mm
1) Not more than 1% of the pellets may be longer than 40 mm, max. Length 45 mm;
2) Dry weight;
3) Particles <3.15 Mm, particulate matter, before handing over the goods;
4) Measurements with lignotester limit value ≥ 97,7% by weight.