Sunsystem BURNiT Pell BIO Series, Technical Passport, Installation And Operation Manual

Page: 25 / 36

25
INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL
the button to open the next page of
the menu.
9.3.6. Setup of burning Level
This submenu
allows you to adjust
the parameters of
the main mode of
o p e r a t i o n
Maximum output of the burner. It is
indicated by three flames .
You can modify the pellet quantity
(Feed) , time interval at which these
pellets are fed (Cycle) and fan output as a
percentage value (FAN) .
Example:
with the period set at
20
seconds, the pellet auger runs for
7,4
seconds feeding pellets in the burner,
and is off for
12,6
seconds.
Select the desired option using the
navigation arrows. Use the " Enter "
button to open the next parameter. Use
the button to open the next page of
the menu.
In this submenu
you can adjust the
parameters of the
medium output
mode of operation
of the burner.
It is indicated by two flames .
We recommend to set at 50% of the main
mode.
You can modify the pellet quantity ( Feed )
and fan output as a percentage value
( FAN ).
Select the desired option using the
navigation arrows. Use the „ Enter ”
button to open the next parameter. Use
the button to open the next page of
the menu.
In this submenu you
can adjust the
parameters of the
lowest output mode
of operation of the
burner. It is indicated by one flame .
We recommend to set at 10÷35% of the
main mode.
You can modify the pellet quantity (Feed)
and fan output as a percentage value
(FAN) .
Select the desired option using the
navigation arrows. Use the „ Enter ”
button to open the next parameter. Use
the button to open the next page of
the menu.
Complete description of the output
modes is provided in section 10 of this
manual.
9.3.7. Suspend
This submenu allows you to adjust the
parameters of the suspended mode of
operation of the burner. You can modify
the pellet quantity ( Feed ) and fan output
as a percentage value ( FAN ).
Select the desired
option using the
navigation arrows.
Use the „ Enter ”
button to open the next parameter. Use
the button to open the next page of
the menu.