SunSynk SUNSYNK-8K-SG01LP1, Installer Manual

Page: 62 / 78

Page | 62 Hybrid Inverter | Installer Manual
5.17. Advanced Settings for Paralleling Inverters
To configure multi-inverter settings, click on the ADVANCE icon.
What this page displays:
ƒ
If the inverter operates as a master or a slave.
ƒ
Modbus Device ID – ‘Modbus SN’ that must be unique for each inverter connected to the
bus/wire.
What you can do from this page:
ƒ
Set the inverter as a master or slave per bus/wire.
ƒ
Set the phase in which the inverter will be paralleled.
ƒ
Set the Modbus SN for paralleling.
The Sunsynk parity inverter can be wired standalone or where more power is required it can be
connected in parallel either single or 3 phase configuration. The maximum number of inverters
that can be paralleled in a single phase utility grid is three and the maximum number that can
be paralleled in a three phase utility grid is fifteen.
To parallel six inverters in a three phase utility grid is necessary to set three inverters as master
and three as slaves:
ƒ
Phase A: Master A and Slave A
ƒ
Phase B: Master B and Slave B
ƒ
Phase C: Master C and Slave C