manualshive.com logo in svg

SunSynk SUN-25K-SG01HP3-EU-BM2, Installer Manual

Share
Download
SunSynk SUN-25K-SG01HP3-EU-BM2 Installer Manual Download Page 20

  

 

  

 

 

 

 

 

 

 

  

 

  

 

 

 

 

 

 

 

Page | 20

Hybrid Inverter | Installer Manual

4.5.  Grid connection and backup load connection

Before connecting to grid, please install a separate AC breaker between inverter and grid. 
Also, it is recommended that installs an AC breaker between backup load and inverter.This will 
ensure the inverter can be securely disconnected during maintenance and fully protected from 
over current. For the 25/30/40/50KW model, the recommended AC breaker for backup load is 
180A. For the 25/30/40/50KW model, the recommended AC breaker for grid is 180A.
There are three terminal blocks with "Grid" "Load"and "GEN" markings. Please do not miscon-
nect input and output connectors.

All wiring must be performed by a qualified personnel.It is very important for sys-
tem safety and efficient operation to use appropriate cable for AC input connec-
tion. To reduce risk of injury, please use the proper recommended cable as below.

Cable type

Cross section (mm

2

)

Range

Recommended value

Industry generic PV cable 

(model: PV1-F)

70~95 (2/0~3/0AWG)

70(2/0AWG)

Backup Load Connection

Cable type

Cross section (mm

2

)

Range

Recommended value

Industry generic PV cable 

(model: PV1-F)

70~95 (2/0~3/0AWG)

70(2/0AWG)

Grid Connection

Please follow the steps below to implement GRID, LOAD, and GEN port connections:
1.  Before making GRID, LOAD, and GEN port connections, make sure to turn off the AC 

breaker or disconnector first.

2.  Remove insulation sleeve 10mm length, insert the wires according to polarities indicated 

on the terminal block. Make sure the connection is complete.Then, insert AC output wires 
according to polarities indicated on the terminal block and tighten the terminal. Make sure 
to connect corresponding N wires and PE wires to related terminals as well.

3.  Then, insert AC output wires according to polarities indicated on the terminal block and 

tighten terminal. Be sure to connect corresponding N wires and PE wires to related termi-
nals as well.

4.  Make sure the wires are securely connected.

Summary of Contents for SUN-25K-SG01HP3-EU-BM2











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands