FORM NO. 660769 REV. C
PAGE 19
2-C
Mount Side Rails Inboard of Legs for:
SL6
with
112” Roller
SL7, SL8, SL10
&
SL12
with
125” Roller
(
See step 2-D for mounting Long Rollers)
Steps:
1. Locate
Side Rails
above
Cross Beams
, inside
SunLift
™
legs.
2.
Side Rail
can extend beyond
SunLift’s
™
Cross Beam
for
U-Bolt
fitting if necessary.
3. Apply anti-seize to all bolt threads before installing nuts.
4. Properly torque all nuts.
5. Repeat on opposite side of
SunLift
™
.
Install AFT
U-bolt, FIRST
Install Forward
U-bolt, LAST
U-bolt SS, 3/8-16
2 Places
Nut SS, Nylok 3/8-16
4 Places
Cross Beam
Summary of Contents for SWIFTSHIELD A Series
Page 5: ...FORM NO 660769 REV C PAGE 5 SwiftShield Overview Continued Lines shown disconnected...
Page 8: ...FORM NO 660769 REV C PAGE 8 1 B Remove The contents of the Power Pack box Pump RC Unit Battery...
Page 12: ...FORM NO 660769 REV C PAGE 12 1 F Drill Manifold Mounting Holes Location Of Mounting Holes...
Page 13: ...FORM NO 660769 REV C PAGE 13 1 G Mounting the Pump Note Mount pump using the holes on the left...
