SUNSTONE Orion 150s Series, User Manual

Page: 33 / 48

Questions? Call or Text +1-801-658-0015 •
29
The Micro Welder Experts
System Settings
In the Settings-System Screen, see Figure 29.1, you
can access the following system-wide controls:
• Restore All Defaults. This feature will restore all
welder settings to factory defaults. When you
use this feature all current settings are lost.
• Clear All Memory. The welder can store certain
welding schedules. This feature will clear the
on-board memory. All existing saved welds will
be lost when you utilize the feature.
• Update Welder Over WiFi. From time to time,
Sunstone will make improvements and changes
to the welder’s software. This feature allows you
to upgrade the software using a WiFi connec-
tion.
• Connect to WiFi. You can connect the welder
to a WiFi connection to update the welder’s
software.
• Enter Test Suite. While working with
Sunstone’s customer service team, you may
be asked to place the welder in a test suite. Use
this button to begin that process.
Note: Sunstone strongly recommends you only utilize
these features when working closely with the Sunstone
customer service team. Call or text +1 801-658-0015
to contact us.
HOW TO RESTORE ALL DEFAULTS
• Press the System Setting icon (J) as shown in
Figure 29.1.
• From the sub-menu, press the System option.
• In the Settings-System Screen as shown in
Figure 29.1, press the Restore All Defaults
Button (K).
• A blue warning screen will appear asking you to
confirm. Press the Yes button to continue; press
the No button to cancel and go back.
Warning: Restoring defaults can not be undone.
Figure 29.1. Use the Settings-System screen to restore
the welder to factory defaults (K), clear all welder
memory (L), update the welder’s software (M), connect
the welder to a WiFi connection (N), or view welder
system information (P).
J
K
L
M
O
P
N
Q