SUNSTONE Orion 150s Series, User Manual

Page: 15 / 48

Questions? Call or Text +1-801-658-0015 •
11
The Micro Welder Experts
is opened. The right dial should measure and
show pressure inside the tank; the dial on the
left, which measures pressure in the hose,
should remain at zero (when the regulator dial is
fully backed out).
• Slowly turn the regulator dial (C) CLOCKWISE
until the dial on the left shows gas pressure
between 7-10 liters per second. See Figure.
10.1.
Microscope LCD Filter Shutter
System
The Microscope LCD Filter Shutter
System provides an unobstructed
working view before welding and
completely protects your eyes during
the welding process. The Orion 150s’s internal comput-
er verifies the Microscope LCD Filter Shutter System
has been closed before allowing the weld to take place.
Should the shutter not close, the microscope lens is
equipped with >UV 16 and >IR 16 for maximum eye
protection.
BECOME FAMILIAR WITH THE MICROSCOPE
The Sunstone microscope has been designed to
provide maximum visual clarity, eye protection, and
ease of use. One challenge using the microscope is
getting used to bringing the work piece to the welding
electrode while looking through the microscope. This
is an easy challenge to overcome. To begin, follow the
suggested practices below while the welder is in Weld
Need argon gas? Sunstone will
ship a right-sized tank to your
doorstep. No more adventurous
trips to the gas store! Call
Sunstone for immediate
delivery: +1 801-658-0015 or
scan the QR code above.
Purchase premium argon gas from Sunstone.
Call +1 801-658-0015
visit www.sunstonewelders.com/gas.
• Delivered directly to your door!
•
Right-sized tank fits almost anywhere!
• Premium argon gas for your Orion 150s!