15
4.5.7) Installation of Motor Cover
1) Cover A is assembled at the right end of the arm
as shown in the figure. Then fix it to the arm
using 5 screws
①
.
2) After assembling the cover A, assemble a hand
pulley into the upper shaft.
3) Cover B is assembled at the back of the arm as
shown in the [Figure 4-12]. Assemble a P/U
bracket before assembling.
4) Fix is to the arm using 4 screws
①
.
5) Cover A and B are fixed with the screw
②
as
shown in the [Figure 4-13].
①
[Fig. 4-11]
①
[Fig. 4-12]
②
[Fig. 4-13]
Cover Support Bar A
Cover Support Bar B (Two pieces)
②
Summary of Contents for KM-1640BL-7
Page 2: ......
