33--22
Sets the height of the needle bar for Chenille embroidery. It can be set at the range from 1 to 10.
Each step is lower or higher from the very next step by 0.3
㎜
.
Confirm the changed settings for Chenille embroidery.
[Fig.3.1-4]
[Fig.3.1-3]
[Example] Set the order of the needle bars as in the table.
①
Press
to activate the number keypad and select colors for normal embroidery.
As in <Fig. 3.1-3>, the screen for needle bar selection appears. The left table of “Needle Select” shows N1.
②
Press “2” on the number keypad. As in <Fig. 3.1-4>, N2 appears on the left table of number selection (in case of
normal embroidery, needle bar selection is needed only. But in case of Chenille embroidery, embroidery type and
needle bar height should be set along with needle bar.)
STEP
COLOR
TYPE
HIGHT
1
N2
2
C3
CHAIN
3
3
N5
4
C4
LOOP
5
5
N9
6
C1
LOOP
8