24
b) Adjusting trimming solenoid
First loosen the clamp screw of trimming solenoid link. Fix solenoid base clamp screw at a point where clutch lever
moves right or left smoothly. When it is done, attach slide arm closely to the left. And then fix the clamp screw of
trimming solenoid link with trimming solenoid stopper closely on the solenoid.
Then, run the solenoid. The clearance between and the trimming cam crank and slide arm is 0.5mm as in figure 37, which
is normal.
[Figure 37]
Solenoid base
Clamp screw of
solenoid base
Clamp
screw Trimming solenoid link
solenoid arm
Trimming crant
0.5mm
E. Adjusting trimming cam.
a) Manually turn pulley
to align with red carved sign
and arm carved sign .
[Figure 38]
White point
(The highest point of
synchro)
b) With the trimming solenoid running on, turn the
trimming cam clockwise. And fix the cam when is
attached to the roller. (See figure 39)
c) When the trimming cam crank turns back after stopping
the operation trimming solenoid, the normal edge of cam
roller is 0.5~1mm. (See figure 39)
[Figure 39]
0.5~1mm
