10
1) Installation of machine head
Insert two machine head hinges
into the bed holes. After aligning it with the rubber hinge , stand the machine on the rubber
cushion
that is in the direction of the user.
[Figure 1]
2
Installation
Caution
▶
Installation of the machine should be performed by a trained engineer.
▶
Any electrical wiring must be performed by a qualified technician or agent.
▶
The machine weighs over 32kg. At least 2 persons should carry out the installing work.
▶
Plug in after the installation is complete. If the operator mistakenly steps down on the pedal
with the plug in, the machine will start automatically and can cause physical injuries.
▶
Connect the ground (earth) wire. An unstable connection may result in an electric shock or a
malfunction.
▶
Place the belt cover on top of the machine.
▶
Use both hands when bending the machine backwards or returning it to the normal position.
Using only one hand can lead to severe hand injuries the weight of the machine.
2) Installation of automatic knee lifting
solenoid and power switch box
(KM-250BL-7N)
A. Installation
a) Attach the power switch box to the area of motor under
the table.
b) As can be seen in Figure2, attach connecter from the
solenoid to controller box through the power switch box.
(See, connecter part of controller box in page11-B)
[Figure 2]
Automatic knee lifting solenoid
Power switch box
Controller box
