install modules on a roof or building during strong winds in case of accidents.
Mechanical Installation
Pole mount
When installing a module on a pole, choose a pole and module mounting structure that will
withstand anticipated winds for the area.
Installation Guide 2011 6/10
www.srsolartech.cn
General installation
Module mounting must use the pre-drilled mounting holes in the frame.
The most common mounting is achieved by mounting the module using the four symmetry points
close to the inner side on module frames.
If excessive wind or snow loads are expected, all eight mounting holes must be used
Do not lift the module by grasping the module’s junction box or electrical leads.
Do not stand or step on module.
Do not drop module or allow objects to fall on module.
To avoid glass breakage, do not place any heavy objects on the module.
Do not set the module down hard on any surface.
Inappropriate transport and installation may break module.