Issue 10
34
The Penny and Giles Pilot + control pod
Power supply
Ensure the power lead is connected
correctly into its socket on the rear of the
control pod (Fig. 33).
The immobiliser plug
When this is activated the chair will
not function, other than the hazard
warning light system. This may be useful
if you wish to leave your wheelchair
unattended (Fig. 33).
To activate the immobiliser
1. Switch the chair on via the On/Off
button (Fig. 34).
2. Insert the immobiliser plug into the
charger/programmer socket located
on the front of the control pod.
3. Remove the plug after 1 - 2 seconds.
4. Your chair should now be
immobilised.
To de-activate the immobiliser
1. Switch the chair on via the On/Off
button (Fig. 34).
2. Insert the immobiliser plug into the
charger/programmer socket located
on the front of the control pod.
3. Remove the plug after 1 - 2 seconds.
4. Your chair should now be ready to
use.
Fig. 33
Fig. 34
On/Off
button
Immobiliser
plug
Charger /
programmer
socket