Issue 10
22
Footrests
Screw assembly
Footplates in
up position
Fig. 17
Fig. 16
Adjusting the footrest length
To adjust the footrest length, remove
the screw assembly on the footrest stem
as shown in Fig. 16, adjust the length
to suit. Replace the bolt assembly and
tighten. Ensure the bolt is firmly located
and tightened prior to use.
Note: The internal footrest stem may
require cutting down in length to
allow the footplate position to be
raised (Fig. 16). This modification must
only be undertaken by an approved
Sunrise Medical service agent.
Footplates
The footplates may be flipped up to aid
entry and exit from the chair (Fig. 17).
WARNING
Do not use the footplates to stand on,
as the full weight of your body may
cause the chair to tip forwards, and
could damage the footrests.