15
Issue 10
Preparing your wheelchair for use
Power
supply
Outer
cover
Power lead attachment
The power lead must also be plugged
into the socket as shown in Fig. 3.
WARNING
When unplugging the power lead pull
off by gripping the outer plastic cover.
Never pull the cable to disconnect the
plug.
Fig. 4
WARNING
To avoid injury to people around you
please be aware that the mirror protudes
outside the space envelope of the chair
and could cause injury to someone when
driving past.
The mirror must be used on the 10KPH
model on UK roads.
Attaching the rear view mirror
1. Firstly set the Pilot Plus remote pod arm
into the desired position.
2. Place the metal clamp over the remote
arm, between the adjust bracket and
the rubber gaiter of the Pilot Plus
swing-away. The holes must be toward
the outside of the chair.
3. Place the mirror through the clamp
holes and then, using the locking
handle, begin to tighten the mirror in
position.
4. The mirror should stand vertically once
in position but can be subsequently
adjusted by slackening off the locking
handle, adjusting the mirror and then
re-tightening - See Fig. 4.
Always make sure that when using the
mirror that it is clean and unbroken so that
it does not impair your visibility.
Fig. 3