5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au
automatic door openers. Once correctly configured IR Control can be performed using the Joystick (or other
Input Device) or from a Specialty Input Device that is connected to the system.
1.12 Charger socket
This socket should only be used for charging or locking the wheelchair. Do not connect any type of
programming cable into this socket.
Refer to R-net Technical Manual SK77981- Operation for details on charging.
This socket should not be used as a power supply for any other electrical device. Connection of other
electrical devices may damage the control system or affect the E.M.C. performance of the wheelchair.
WARNING
The control system’s warranty will be void i
f any device other than the battery charger supplied with the
wheelchair or the lock key is connected into this socket.
2
LCD SCREEN
The status of the control system can be understood by observing the LCD screen.
The screen for the R-net CJSM2 has common components, which will always appear, and components that
will only appear under certain conditions. Below is a view of a typical Drive screen, with and without lights.
The screen is split into four areas of information: Battery Indicator, Information Bar, Main Area and Text Bar.
Each area is detailed separately in the following sections.
2.1
Battery indicator
This displays the charge available in the battery and can be used to alert the user to the status of the battery.
Steady:
This indicates that all is well.
Flashing Slowly:
The control system is functioning correctly, but you should charge the battery as soon as
possible.
Stepping Up:
The wheelchair batteries are being charged. You will not be able to drive the wheelchair until
the charger is disconnected and you have switched the control system off and on again.
If the battery gauge shows red, yellow and green, the batteries are charged. (Bars 1-10)
Summary of Contents for Magic Mobility R-net CJSM2
Page 1: ......
