5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au
External switches connected to the External Profile jack socket can also be used to control devices, but
programming of the R-net will be required. Refer to chapter Bluetooth Programming for more details.
4
OPERATING AN ANDROID DEVICE
The operating method is similar to that of a Windows PC and the same programmable options apply. Refer to
the Bluetooth Programming chapter
for more details.
4.1
Considerations
The CJSM-BT cannot switch an Android device on or off.
The Sleep function of the Android device must be disabled.
If the device does ‘go to sleep’, then a manual wake
-up process will be needed.
5
OPERATING AN IDEVICE
The CJSM2-BT can control an iDevice in two ways:
Using the iDevice’s Switch Control functionality
Using the iDevices Switch Control functionality in conjunction with the iDevices VoiceOver functionality
These two methods will be referred to as Switch Control and VoiceOver respectively, and each is explained in
the following sections.
5.1
Switch control
The principle of Switch Control is that certain iDevice commands, such as the Home button or tapping the
screen, can be assigned to commands received via Bluetooth from an external device such as the CJSM2-BT.
The process for assigning CJSM2-BT commands to the iDevice commands is covered in section Switch
Control Set-Up.
An example of Switch Control is given below. Please note, the screen navigation sequences are defined by the
iDevice and not the CJSM2-BT.
Switch Control operates by highlighting sections within the application window. Various commands are then
used to navigate the sections and to select individual applications.
Summary of Contents for Magic Mobility R-net CJSM2
Page 1: ......
