5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au
Point the TV remote control at the CJSM2 Receiver LED and press the Channel Up button twice.
A check denotes a successful learn operation.
A cross denotes an unsuccessful learn operation, please retry.
After the code is learnt highlight Exit and deflect the joystick to the left. This will return the system to the
Appliance level of the IR Set-up Menu.
NOTE
The first time an IR Code has been learnt, it is necessary to cycle the power to the CJSM2. If other IR
Codes are already learnt, then this is not necessary.
3.1
Learning an IR code - Sequence
Multiple IR Codes can be learnt against one Command in the CJSM2 IR set up menu. This enables multiple IR
Codes to be transmitted through one Command in the CJSM2 when in IR mode.
Examples of use:
1.
The on/off function for multiple appliances (the TV and the DVD for example) can be learnt against one
entry in the IR Set up menu. The CJSM2 will then transmit the Codes for the learnt Command in one
burst. In this case turning the TV and the DVD recorder on or off effectively simultaneously.
2.
Previously selecting a TV channel required the user to select the individual channel’s digits from a list.
This could be quite cumbersome when trying to select a TV channel with multiple digits e.g. Channel
143.
Now the individual Codes for “1”, ”4” and “3” can be learnt against one Command in the CJSM2 IR
Set-up Menu. When this Command is selected the IR Codes are transmitted in the correct sequence.
To create a Sequence, relating to example 1 above:
Select the Command to use as the Sequence initiator. In this example, TV > On/Off.
Summary of Contents for Magic Mobility R-net CJSM2
Page 1: ......
