manualshive.com logo in svg

Sunrise Medical 8HM, User Manual, Page: 36 / 44

Share
Download
Sunrise Medical 8HM User Manual Download Page 36

8/9HM 8/9TM__________________________________________________________________                                                                                      

_____________________________________________________________________________     

8/9HM 8/9TM User Manual                                                                                               Page 36 

 

Quick release self-propelling wheels 

Your  wheelchair  may  be  fitted  with  either  fixed  or 
quick  release  wheels.  Quick  release  wheels  can  be 
removed  from  the  wheelchair  to  make  it  lighter  for 
lifting and easier to store. 
 
 

To remove wheel: - 

Press  the  button  (1)  in  the  centre  of  the  wheel  and 
slide the axle and wheel out of the axle bush fully. 
 

 
To replace wheels: - 

Reverse  the  above  procedure  and  depress  the 
centre button of the axle and push the exposed 
axle into the wheel bush. When the axle/wheels 
are fully inserted release the centre button. 
 
Check  that  the  button  is  fully  released  and  that 
the  wheel  is  secure  in  the  axle  bush  by  pulling 
the wheel gently away from the wheelchair. The 
wheel should remain in the same place. 
 

 

 

Always ensure that the quick release wheels are fully engaged with the locking ball 

bearings (2) on the axle shaft fully engaged and visible on the inner side of the axle bush. 
 

 Never mount the quick release rear axles with the release button positioned inside the 

frame.  This will cause the wheels to release when the chair is folded. 
 

  Do  not  alter  the  position  of  the  wheels  in  the  wheel  mounting  blocks  without  the 

approval of the person prescribing the wheelchair. 
 

 

1

 

2

 

Summary of Contents for 8HM













































Reviews:

No comments