manualshive.com logo in svg

Sunrise Medical 8HM, User Manual, Page: 11 / 44

Share
Download
Sunrise Medical 8HM User Manual Download Page 11

8/9HM 8/9TM__________________________________________________________________               

______________________________________________________________________________   

8/9HM 8/9TM User Manual                                                                                                 Page 11 

 

Locate  the  holes  on  the  footrest  assembly  onto  the  pivot  pins  on  the  wheelchair.  Swing  the 
footrest inwards until the locking latch 

C

 engages 

 

A small spring “R” clip may be fitted to prevent the footrest from detaching when the wheelchair is 
lifted into a car boot.  

 

4.2 Heel loops 
 

Heel loops may be fitted to the footplates. These should be turned to rear of the wheelchair when 
the footplates are in the down position 

 

4.3 folding and unfolding the wheelchair for use  

 

Unfolding the backrest 

To  put  the  backrest  in  the  upright  position,  push  the  handles  upwards  and  forwards  and  then 
slide the levers (A) downwards fully

. 

 

Folding the backrest 

The backrest can be folded to make storage of the wheelchair easier. 
 
To  fold  the  backrest,  stand  behind  the  wheelchair,  grip  the  two  small  levers  (A)  positioned  on 
each  side  of the  backrest  (just  above  the  armrests)  and  slide  them  upwards.  Fold  the  backrest 
down

. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Summary of Contents for 8HM













































Reviews:

No comments