manualshive.com logo in svg

Sunrise Medical 8HM, User Manual, Page: 30 / 44

Share
Download
Sunrise Medical 8HM User Manual Download Page 30

8/9HM 8/9TM__________________________________________________________________                                                                                      

_____________________________________________________________________________     

8/9HM 8/9TM User Manual                                                                                               Page 30 

 

To adjust Calf Pad: - 

Slacken screw on lock collar (F) 
Release Cam Lever (E) 
Move pad to desired position and close lever (E) 
Position lock collar (F) against calf pad bracket (E) 
Tighten lock collar screw (E) 6-8Nm 
 

Calf Pad height adjustment: - 

Undo nut & bolt (E1) 
Raise or lower the calf pad to desired height 
Replace bolt and nut (E1) Tighten bolt & nut (E1) 8-10Nm 
 

To adjust footplate for leg length: - 

Slacken nut (H) 
Raise or lower footplate 
Tighten (H) 12-16Nm 
 

To adjust footplate for angle: - 

Slacken 3 screws (I) 
Rotate footplate to desired angle 
Tighten 3 screws (I) 8-10Nm 
 
To use ALR  
Pull cam lever (G) upwards, raise or lower main stem to desired position 
Push cam lever (G) to lock in position. 
Lift up lever (E) to rotate the calf pad out of the way  
Push down lever (E) to lock in desired position  

E 

L 

E1 

F 

K 

Summary of Contents for 8HM













































Reviews:

No comments