31
Limit Adjustment from Fabric Stretching
Because the fabric is under tension it will stretch over time and require the motor to be
adjusted.
• To adjust the motor simply roll the awning in with the remote control.
• Once it stops adjust the
white
“inner” limit on the motor using a 4mm allen wrench rotating
it towards the “+” sign.
• Do this until the valance bar is tucked neatly into the cassette.
Be sure not to over
retract the awning as it will put undue stress on the motor and arms.
• If you have retracted the valance bar too far, the motor may not shut off. YOU NEED TO
LISTEN TO SEE IF MOTOR IS STILL RUNNING IF IT IS YOU WENT TOO FAR!
• Simply roll the awning out a couple of inches with the remote. Rotate the same white
”inner” limit 4mm allen wrench towards the “ – “ sign and then roll the awning back in.
Motor
Override Pin
Adjustable
Pitch Pin
Summary of Contents for Retractable Awning
Page 33: ...Page Page 40 38 ...
