1. Resistance can be adjusted by tension control to increase or decrease the exercise intensity.
2.
After long term use, if you believe the turning parts are loose, please tighten the bolts or
screws.
8. Maintenance and Treatment
1. Verify that all the bolts and nuts are locked properly and the turning parts should be turned
freely without damaged parts.
2. Clean the equipment with soap and slightly damp cloth only. Please do not use any solvent
to clean the equipment.
Malfunctions and treatment
Malfunction
Reason
Treatment
Base is unstable.
1. Floor is not flat or there is
small object under the
front or rear stabilizer.
2. The front and rear base
feet have not been leveled
when assembling.
1. Remove the object.
2. Adjust the front and rear base
feet.
Right and Left
handlebar tubes or
seat cushion are
shaking.
The screw loose.
Tighten the screws.
Loud noise from
the moving parts.
The interval of the parts has not
been tightened correctly.
Open the covers to check.
No resistance when
using the
equipment.
1. The interval of the
magnetic resistance
increases.
2.
Tension control is damaged.
3.
Running belt is slip.
1. Open the covers to check.
2. Replace the Tension control.
3. Open the covers to check.
9.
Warm Up Exercises
9
Summary of Contents for SF-RB801
Page 1: ......
Page 6: ...4 Overview Drawing 5 ...
