6
Sunnex TRI-STAR Service & Installation
Manual
5. ASSEMBLY AND INSTALLATION OF TRI-STAR WALL
Your shipping carton will contain a lamp head and flex arm, an extension
arm, Melamine covered wall board (2
4” W X 16” L X 0.78” THK OR 610mm
W X 407mm L X 20mm THK) with U-bracket and transformer enclosure
mounted on the board, and four (4) plastic fasteners to capture the power
cord on the underside of the arm. Surface mounting lag bolts are not
supplied. These should be purchased to meet local codes, and to ensure
they are appropriate for your particular mounting surface.
The length of the board has been chosen so that two wall studs may be
engaged during installation.
WARNING! Please check local building codes for your specific application.
ATTACHMENT OF LAMP HEAD/ARM/ASSEMBLY:
1. Attaching extension arm to wallboard: Place the end of the extension
arm inside U-bracket and place plastic washers so that washers are
between U-bracket and end of arm. Secure arm end to U-bracket with
countersunk screws (2 X 1/4
”-20), use provided Allen key (5/32). (See
following illustrations).
END OF
EXTENSION
ARM
