11
Sunnex TRI-STAR Service & Installation
Manual
Only use the following bulbs:
Sunnex part# 18562
CAUTION! A CHOICE OF A REPLACEMENT LAMP/REFLECTOR CAN AFFECT THE
PERFORMANCE OF YOUR TRISTAR LIGHT.
8.2 FUSE REPLACEMENT
1. Remove the plug from wall receptacle.
2. Access the transformer housing and detach the front cover by removing
the four plastic screws using a flat screwdriver.
3. Locate fuse blocks (2) in the transformer.
4. Turn the fuse holder counter clockwise using a suitable tool and remove
the fuse holder from the fuse block by pulling it out.
5. Replace fuse with proper replacement fuse.
Fuse Replacement Specifications:
USA (110V): Buss Fuse
– MDA 2 250 Volt OR Interpower 813MDA-2
(250V, 2 Amp Fuse,
MUST USE A SLOW-BLOW FUSE
) Europe
(230V): Littlefuse
– T-1.25A-218 (250V, 1.25 Amp Fuse,
MUST USE A SLOW-BLOW FUSE
)
6. Follow procedure in reverse to return lamp to operating condition.
For more information on our product, visit our web site at
or call us at (800) 445-7869.
SYMBOLS
GROUND
SWITCH ON
SWITCH OFF
CAUTION
9. WARRANTY
Limited Warranty
Sunnex warrants that the Product, if properly used, will be free from defects in material and
workmanship, for a period of three (3) years from the date of shipment to Customer. This Limited
Warranty extends only to the original buyer. If the Product is determined to be defective within
the warranty period, Sunnex, at its option, will repair or replace the Product, at no charge.
