5
Sunnex TRI-STAR Service & Installation
Manual
3. OPERATION
Plug the three prong molded plug into an appropriate Hospital Grade
receptacle. Power-on your light via the rocker switch on the back cover of the
lamp head. The TRI-STAR is powered by a 105W isolation, step-down
transformer, that contains an internal thermal cutoff for your added safety.
The transformer steps down ordinary wall current to allow for activation of the
three lamp reflectors.
4. ASSEMBLY OF TRI-STAR MOBILE
Remove the upright column and the lamp head assembly from the shipping
carton.
Insert the threaded end of the upright column and screw the upright column
into the base. Mount the screw with washer to the bottom of pole, using Allen
wrench (provided).
Attaching the lamp head assembly is a simple procedure. Raise the metal
collar of the connector, and slip the assembly onto the standoff on top of the
upright column. Once in place, push down on the metal collar to properly seat
the connection. CAUTION: IF YOU DO NOT FEEL A POSITIVE SEATING,
PROPER CONNECTION HAS NOT BEEN ACCOMPLISHED. CHECK AGAIN
TO ENSURE YOU HAVE SECURELY CONNECTED THE LAMP HEAD
ASSEMBLY TO THE UPRIGHT COLUMN.
