background image

Precautions

Warning

Important Safety Instructions

Recommendation

· Please insert the AC plug into the AC outlet according

to the identifying input on the power adapter;

· It is prohibited to use the device in any places with

potential explosive gases;

· Nonprofessionals shall not open the power adapter

anyhow so as to avoid dangers;

· The device is a Grade A product. In living environment,

the product may cause radio interference. Therefore,
users may be required to take practical measures
against the interference.

· About the battery replacement:

1. It may cause explosion with wrong type battery
2. Old battery which is replaced should be handled

by repair man, do not put it in fire!

· Adapter shall be installed near the equipment and

shall be easily accessible.

· The operating temperature of the device between

-10℃ to 40℃.

· The device complies with RF specifications when

the device used at 20cm form your body.

· This product can be used across EU member states.

Statement

Disclaimer

· Avoid installing or using during thunder and lightning,other

wise lightning stroke may occur;

· Cut off the power immediately if there is abnormal

smell, overheating or smog;

· Do not touch the sharp paper cutting tool!

The company is not responsible for the following behaviors:

· Damages caused by using and maintaining the device

without following the User Guide;

· Damages or problems caused by selection of objects or

Consumables (products which are not the initial ones
provided or recognized by the company).
In this case, the company will not undertake any
responsibility. No one is entitled to modify or change the
product unless permitted by the company.

Discrepancies  between  the  product  and  the  file  concerning 
details may raise due to product updates. Please be subject to 
the material object. The company reserves the right to 
interpret the file and the right to revise this manual without 
prior notices.
Please make sure the temperature for adapter will be from 
-10 ℃ to 40 ℃.
Please make sure the temperature for device will be from 
-10 ℃ to 40 ℃.

· Do not use the device near water or in humid

environment.Keep liquid from falling onto the
terminal;

· Do not use the device in extremely cold and hot

environment, e.g. around fire or lighted cigarettes;

· Do not smash, throw or bend the device;
· Use the device in clean and dustfree environment

as much as possible and keep small items from

falling into the terminal;

· Do not use it near medical devices unless permitted.

FCC Statement 

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 

authority to operate the equipment.   

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including interference that may cause undesired operation.   

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment 

should be installed and operated with minimum distance 20cm between the radiator& your body.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the following measures: 

—Reorient or relocate the receiving antenna. 

—Increase the separation between the equipment and receiver. 

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

—Consult the dealer or an experienced radio/TV technician for help. 

RF Frequency:

2.4G Wi-Fi: 2412-2462 MHz(b/g/n20), 2422-2452 MHz(n40) 

BLE(1Mbps)/BLE(2Mbps): 2402-2480 MHz 

BT:2402-2480 MHz

5G Band 1:5150~5250 MHz, Band 4: 5725~5850 MHz

GSM850: 824-849 MHz(TX), 869-894 MHz(RX) 

GSM1900: 1850-1910MHz(TX), 1930-1990MHz(RX)  

WCDMA Band II: 1850-1910 MHz MHz(TX), 1930-1990 MHz(RX) WCDMA Band 

V: 824-849 MHz(TX), 869-894 MHz(RX) 

LTE Band 2: 1850-1910 MHz(TX), 1930-1990MHz(RX) 

LTE Band 4: 1710-1755 MHz(TX), 2110-2155MHz(RX) 

LTE Band 5: 824-849 MHz(TX), 869-894 MHz(RX) 

LTE Band 7: 2500-2570 MHz(TX), 2620-2690 MHz(RX) 

LTE Band 38: 2570-2620 MHz(TX), 2570-2620 MHz(RX) 

LTE Band 40 Lower: 2305-2315 MHz(TX),2305-2315 MHz(RX)

LTE Band 40 Upper:2350~2360MHz(TX),2350~2360MHz(RX)

LTE Band 41:2555~2655MHz(TX),2555~2655MHz(RX)

Summary of Contents for T2SL














Reviews: