POS Machine Installation
Customer Display
Cable cover
Interface cover
TF card slot
SIM card slot
Micro USB
debugging port
Debugging
function button
Open the paper roller cover
1
Install printing paper
2
Connect the power cable
3
1
2
3
GND
RXD
TXD
5V
Power port
Cashdrawer Port
LAN port
USB port
USB port
Headset jack
Serial port
SIM card slot
Note: The machine must be in the power-off status
during inserting or removing the SIM card. If plugging
or removing is done in the power-on status, it may
cause a machine stoppage.
·Use a card pin to open the card cover;
·Insert/remove the SIM card according to the illustrated
directions;
TF card slot
For connecting an external TF memory card.
Micro USB debugging port,
debugging
function button
For debugging the POS.
Cashdrawer Port
This port can only supports 24V/1A cashbox.If you use a
12V cashbox, there maybe has a potential risk of circuit burns.
Pull the printer handle out, and the
paper roller cover pops out
automatically.
Connect the power interface of the adapter to the
power port at the bottom of the POS. Connect the
other end of the adapter to the power socket.
Place 80mm thermo-sensitive paper,
pull out a section from the paper exit,
and then close the paper roller door.
