56 Broome Corporate Parkway
Conklin, NY 13748 USA
P 877.786.6299 | F 877.786.0329
www.sunmaxxsolar.com
Page 19 of 47
Step 5.
Put the heat pipes into the water tank slowly.
Attention: If it is not easy and
convenient to do, we can adjust the angle between the water tank and the ground
properly.
Step 6.
Connect the joint screw with the nuts inside the water tank and screw them
tightly by 22mm spanner. Please pay attention to the tightness extent, avoiding being
too loose to cause water leakage.
Step 7.
Install all the heat pipes according to this method. Adjust the angle and the
inappropriate places, keeping them horizontally. Then charge water into the tank to
check if there is a leakage from the connections.
Step 8.
Insert the vacuum tube into the anti-dust circle of water tank, and then install
the tail stocks that have been taken down.
Attention: when inserting the vacuum
tubes, they cannot be revolved for fear that they destroy the heat pipes.
