background image

14

3.  Clean the drive shaft with biodegradable oil (Fig. 14).
4.  Place the new blades onto the drive shaft so that the 

holes on the axles line up with the holes on the drive shaft  

(Fig. 14).

5.  Insert the 2 bolts through the holes and secure them with 

the 2 nuts (Fig. 14).

IMPORTANT:

 

The blades must be set in the correct turning 

direction. Note the way the old blades came off and replace 

the new ones exactly the same way.

Repair

This product does not contain any parts that can be repaired 

by the consumer. Contact an authorized Snow Joe

®

 +  

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

 customer 

service center at 1-866-SNOWJOE (1-866-766-9563) for 

assistance.

Storage

• 

Examine the cordless  cultivator thoroughly for worn, 

loose, or damaged parts. Should you need to repair or 

replace a part, contact an authorized Snow Joe

®

 +  

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

 customer 

service center at 1-866-SNOWJOE (1-866-766-9563) for 

assistance.

• 

Remove the battery from the cordless  cultivator 

before storing.

• 

Clean the product as described above.

• 

Store the product and its accessories in a dark, dry,  

frost-free, and well-ventilated place.

• 

Always store the product in a place that is inaccessible to 

children. 

• 

The ideal storage temperature is between 50ºF (10°C) and 

86ºF (30°C).

• 

We recommend using the original package for storage or 

covering the product with a suitable cloth or enclosure to 

protect it against dust.

B Charger Off-Season Storage

1.  Do not expose your battery pack or charger to water, 

rain or allow them to get wet. This could permanently 

damage the charger and the battery pack. Do not use oil 

or solvents to clean or lubricate your battery pack as the 

plastic casing can become brittle and crack, causing a 

serious risk of injury.

2.  Store the battery pack and charger at room temperature 

away from moisture. Do not store in damp locations where 

corrosion of terminals may occur. As with other battery 

pack types, permanent capacity loss can result if the pack 

is stored for long periods of time at high temperatures 

(over 120ºF/49ºC).

3.  EcoSharp

®

 iBAT40 lithium-ion battery packs maintain 

their charge during storage longer than other battery 

pack types. As a general practice, it is best to unplug the 

battery charger and remove the battery pack when they 

are not in use. Recharge the battery pack every 6 months 

to 50% capacity (2 lights on) during off-season storage to 

maintain optimal battery performance.

Transportation

•  Switch the product off.

 Ensure that the wheels are set to the 

transport position (see Fig. 9, pg. 11).

• 

Always carry the product by its transport handle.

•  If you are transporting the cultivator in a vehicle, 

brace it properly to protect it from heavy impact or strong 

vibrations.

•  Secure the product to prevent it from falling over or 

slipping.

Rec Disposal

The product comes in a package that protects it against 

damage during shipping. Keep the package until you are 

sure that all parts have been delivered and the product is 

functioning properly. Recycle the package afterwards or keep 

it for long-term storage.

WEEE symbol. Waste electrical products should not 

be disposed of with household waste. Please recycle 

where facilities exist. Check with your local authority 

or local store for recycling regulations.

Fig. 13

2 bolts + 2 nuts

Steel 

blades

Drive shaft

Fig. 14

2 bolts + 2 nuts

Summary of Contents for iON12TL





















Reviews: