System Manual
38
*The figure is indicative only, and actual product may differ.
On site, perform cable connections according to the actual wiring diagram.
6.4
Checking after Electrical Connection
Checking Item
Requirement
Equipment appearance
The equipment is intact, and free from rust and paint flake-off.
Repaint areas with paint flake-off (if any).
The labels on the equipment are legible.
The damaged labels must be replaced in time.
Appearance of cable
Cable sheathings are properly wrapped and free from obvious
damage.
Hoses that contain cables are intact.
Cable connection
Cables are connected in the designed positions.
Terminals are prepared as required and securely connected.
Labels on both ends of each cable are clear and specific, and
attached in the same direction.
Cable routing
Power cables and communication cables must be routed
separately.
Cables are neat and tidy.
The joints of cable ties are evenly cut without burrs.
Cables are placed properly and not tense at turning points.
Cable routes are straight and smooth, and do not intersect
inside a cabinet.
Container
The container is clean and tidy inside, without any unnecessary
cables, cable heads, terminals, or tools. No obvious garbage is
found outside the equipment.
Summary of Contents for MVS6250
Page 2: ......
