Sungrow AC011E-01, User Manual, Page: 21 / 44

13
step 4 Ensure that the cable is secured.
- - End
2.5 Wall-Mounted Installation
Install the charger on the wall using the provided wall-mounting bracket and expansion
screw sets.
The load-bearing capacity of the installation carrier must be at least 4.5 times the
weight of the charger.
step 1 Install the backplate.
1 Hold the backplate in the desired position on the wall and mark the positions of the drill
holes.
Before drilling the hole for the backplate, locate and avoid water pipes and elec-
trical wires in the wall.
2 Drill holes at the marked positions using a hammer drill. (Diameter: 6 mm; depth: 45
mm)
3 Insert the dowel into the holes.
4 Place the backplate on the wall and tighten the screws using a screwdriver to secure the
backplate.
User Manual 2 Installation