14
The height of the articulated arm should be adjusted in such a way that both
articulated arms are at the same height as each other.
20
– Operating the awning
The remote control supplied is already preprogrammed for the motor. Press the
arrow buttons
to extend or retract; the middle button serves as the stop
button.
When the buttons are pressed, the red LED below the buttons lights up. If this is not
the case, please replace the battery.
21 - Programming the remote control
If the awning does not respond to the remote control despite the red LED lighting up,
you should try to reprogramme the remote control to the built-in motor.
- Unplug the awning from the socket
- Open the battery cover on the back of the remote control. There is a "P2" button
next to the battery
- Put the plug back into the socket - the motor should beep once
- Press the "P2" button once - the motor should respond by moving
- Press the "P2" button again - you should hear a beep when you do so
- Turn the remote control over and press the retract button on the front (upper arrow
button). You should hear a 7 beeps from the motor.
Note: there is another small cable with a programming button on the motor.
This button is required solely for the settings in the factory and should not be
pressed!
Summary of Contents for Elba 28883674
Page 1: ......
