Part # 1844030 (03/19/10)
Page 12
OPERATION
Explanation of Controls
Power/Mode Switch (4)
: In the cool down position, the fan
motor will run continuously with the oven door in the open
position. In the cook position the fan & heat will stop when
the doors are opened. In the off position, all power is off.
Fan Speed Switch (2):
Controls the fan speed for various
cooking recipes.
Timer (5)
: turn timer clockwise to desired time. It will count
down to zero and the buzzer will sound. The buzzer will
continue until the dial is turned counterclockwise to the OFF
position.
Power On Lamp (3)
: Illuminates when power switch is placed
in “ON” position. When temperature is reached, the light goes
out.
Heat On Lamp (6)
: Illuminates with the burners or as the
thermostat cycles.
Temperature Control (7):
the temperature indications
are shown on the dial’s surface. Turn the dial to desired
temperature.
Operation of Controls.
NOTE: The SunFire oven is equipped with electronic ignition
& two-speed motors.
1. Set Power/Mode switch (
4
) to the COOK position. Set Fan
Speed switch (
2
) to the desired fan speed.
2. Set temperature dial (
7
) to desired temperature setting.
3. Allow a minimum 20 minute preheat time. When
desired temperature is reached, the illuminated (amber)
indicating light will go out (
6
).
4. Load oven, for best results; load bottom to top. Set timer
if desired. *See cooking chart for suggested times and
temperatures.
Automatic Cool Down Feature
1. Turn temperature dial (
7
) to “OFF” position, set Power/
Mode switch (
4
) to COOL DOWN position.
2. Open oven doors. Allow a minimum of 30 minutes for the
oven temperature to be reduced.
3. At the end of daily use, we recommend that the doors be
left slightly open for complete cooling.
1 Oven Light Switch
2 Fan Speed Switch
3 Power On Lamp
4 Power/Mode Switch
5 Time Select Control
6 Heat On Lamp
7 Temperature
Select Control
