Crystalline Silicon Solar Module Products Installation Manual (IEC)
1 Scope
This installation manual specifies the installation and maintenance requirements for crystalline silicon PV
modules (hereinafter referred to as "solar modules") manufactured by Sunerg Solar. (hereinafter referred to as
"Sunerg" ).
This installation manual is intended for the installation and maintenance of solar modules (hereinafter
referred to as "solar modules"), and helps customers to correctly install the photovoltaic power generation
system, so that the design system can realize its potential. This installation manual does not apply to the
installation of the Sunerg double glass modules and conventional modules.
2 The introduction of installation manual
2.1 Overview
Thanks for choosing the crystalline silicon PV module of Sunerg Solar This manual contains important
electrical and mechanical installation information. For correct installation and stable power output, please
install and maintain the modules Carefully read and understand all installation instructions in the manual, and
Keep this manual in a safe place for future reference (care and maintenance) and in case of sale or disposal of
the modules.
This manual does not constitute a warranty, expressed or implied. Sunerg does not assume responsibility
and expressly disclaims liability for loss, damage, or expense arising out of or in any way connected with
installation, operation, use or maintenance of modules.
The PV modules should be installed in accordance with all safety precautions and local laws and
regulations of this manual and should be installed and serviced by qualified personnel with knowledge of the
mechanical and electrical requirements of the system.
The mechanical and electrical installation of the PV modules shall be made in accordance with applicable
laws and regulations, including electrical, construction and electrical connection requirements. These
regulations vary depending on the installation site, such as building roofs, surface mounts, in-vehicle
applications, and so on. The requirements may vary depending on the installation system voltage, the use of
DC or AC. Please refer to the relevant local laws and regulations.
Any questions, please contact with the salesman or customer service personnel of Sunerg Solar for further
explanations.
2.2 Applicable products
This manual is intended for use with the following solar modules:
Monocrystalline PERC PV modules
（
Horizontal
）
: XMCHH; XMCHH;
XMCH1H
