1. Introduction
Before attempting installation, read the instructions in this manual carefully. This manual contains
easy to follow step-by-step procedures to property install our Techno-Solis pool solar system. Your
understanding our system and it parts will assure a successful, trouble-free installation. If you have
any product or installation questions regarding this installation, contact our representative at your
nearest area.
It is important to recognize that this manual outlines the recommended installation methods and
practices as prescribed by the factory. It is designed to aid the installer or even the novice through
providing optimum protection for the products. Also, these are the minimal requirements; addition-
al protection may be required in hazardous environments or in areas subject to extremes of weather.
In those areas, the local expertise of the contractor may be relied upon in coordination with our ap-
proval for special installation considerations.
Take time to read through this manual. It will guide you through the most effi
cient way to correctly
install our pool solar system. By following this step by step guide, your system will meet the instal-
lation standards recommended by the factory. In addition, because we’ve included techniques and
tips gathered from experienced SUNDWARE contractors throughout the countries, using this instal-
lation will save you time and eff ort.
2. Getting Started
Before you begin your installation, here are a few important advices:
1. Caution- Safety Comes First !!!!
• There is no substitute for safety. Always exercise extreme caution, care and good jud
ments when working on or around a roof or pool area.
• Please take care to avoid hazards such as over-head electrical wires or loose shingles or
roof
tiles.
• Be sure to secure ladders so they will not slip or fall.
• Do not allow extension cords to lie in the pool or in standing water.
• Wear shoes with proper tread to prevent slipping on the ladder or sloped roof areas.
• Disconnect all power to the pool equipment when installing an automatic control
system.
2. Before starting any work, determine the location of your system and prepare a schematic
drawing of the installation area. Include the location of the feed and return lines in this
drawing. Roof areas often times look bigger than they really are, so be sure to measure the
available area before making your schematic.
3
Solar Pool System
Installation Manual
